Lamex

Characteristics of lacquering furniture

It can be divided into two categories: they include veneer with MDF or particle board with lacquering. Both categories are made up of top quality lacquer and craftsmanship and fulfill the GB standard.
Since all veneers at Lamex are natural, each piece of veneer has its own color and pattern. It is normal that variation in patterns and color will be occurred on the same desktop when placing different veneers together.
Fading may occur after long time usage, especially light color veneer.

Safety Passed test & certificate

The emission of Carcinogen-formaldehyde complies with the GB18580-2001 and International E1 Standard. We ensure our products are within safety level to users and the environment.
Meet the requirement of QB/T1951.1 to abrasion, heat resistance and corrosive resistance.

Care & Maintenance

The maximum loading of drawer is limited to 35kg.
To prevent distortion of desktop, avoid heavy loading of 90kg or above.
Use diluted cleansing solvent to remove any oil-borne stains instead of oils/ammonia-containing cleaners or concentrated/ erosive solvent.
Prevent direct contact with erosive solvent, alcohol, nail enamel, cleansing detergent etc.
Periodically move desk accessories and other objects kept on the worksurface to ensure even aging.
Acidic, alkaline, hot objects will damage the surface of the desk. Use desk pads or coasters to help protect the finish against permanent damage.
Avoid contact with sunlight or ultra-light since they will accelerate the aging of the painting.
Lift objects like stationeries when you move them, instead of pulling or pushing them across the surface, to avoid scratching the surface.
Use soft brush to wipe away surface dust, or use dry soft cloth to wipe the surface in the direction of the wood grain only.
Don't wipe the surface in circular motion for damaging the brightness of paint.
Use damp soft cloth soaped with solvent, mix with water and lighter fluid to eliminate difficult stain. Use another damp (do not saturate) soft cloth to clean again and finally use a dry soft cloth to absorb excess water. Avoid using rough and unclean cloth to wipe the surface of desk.
Soft cloth soaped with diluted alcohol to remove stamp, ink, lipstick stain.
Soft cloth soaped with methanol, alcohol or acetone to eliminate pencil mark.
Soft cloth soaped with acetone, thinner or naphtha to eliminate juice, paint or marker stain.
Soft cloth soaped with toluene to eliminate tea, coffee or instant glue.
For the above difficult stain, use another damp soft cloth (not wet) to clean again and finish by wiping with a soft, dry cloth.
Be cautious when using methanol, acetone and toluene (they are flammable and corrosive).
Suggest polishing the surface twice a year, allowing 2-3 days for absorbing the wax. Don't use the desk within this period. Before polishing, use soft cloth soaped with lukewarm cleansing solvent to remove old wax.
Use paint brush or cotton ball soaped with similar color to fill scratches or dents.
In case of serious scratch or damage, contact our Customer Services Department for maintenance arrangement. Maintenance or delivery fee may be charged.

Product Warranty